4 min read
Enhancing Safety Through Gas Detection and Calibration
Safety is paramount for all industrial operations; ensuring the well-being of personnel, protecting the environment, and maintaining proper facility...
Uncategorized
.png?width=1920&height=1080&name=Copy%20of%20Blog%20Header%20Image%20Template%20(26).png)
4 min read
GTH's Dynamic Engineering Services: Powering Our Nation's Key Infrastructure Industries
Since the inception of the George T. Hall Company (GTH), our founder, George Hall coined the phrase "The House that Service Built" as a testament to...
1 min read
Regulation Update, AMS2750F
What is New in the Updated AMS2750F? The AMS2750 specification covers pyrometric requirements for thermal processing equipment used for heat...
1 min read
November Solution Spotlight, Watlow F4T Controller
The Watlow F4T with INTUITION temperature process controller has a wide range of field removable I/O modules for maximum design flexibility. The F4T...
1 min read
Standard Test Method for Conducting Temperature Uniformity Surveys
When you roll your cart into a gas fired furnace, you are relying on your furnace to provide an even amount of heat to your product to ensure a...
Achieving Overall Equipment Effectiveness
According to oee.com, OEE is the ratio of fully productive time to planned production time. It is calculated as the product of these three...
1 min read
Industrial Flame Monitoring
If a pilot fires, and flame is lit, and there is no one there to see it does it in fact exist? It does if it is being overseen by an Industrial Flame...
1 min read
CFR Part 11, July Solution Spotlight
The FDA regulates companies in the health care, pharmaceutical, medical device, and life science fields to confirm they are in compliance with strict...
1 min read
AQMD Rule 1147, July Solution Spotlight
The purpose of AQMD Rule 1147 is to reduce nitrogen oxide emissions from gaseous and liquid fuel fired combustion equipment as detailed in the rule....